Bicycle disc brake pad correction wrench chain tool pedal wrench crank puller

Book:

BBB-4 Big Blue Book of Bicycle Repair by Calvin Jones is packed with easy-to-follow, step-by-step procedures, color photos and repair tips for keeping almost any road or off-road bike running smoothly and trouble-free. Whether it's repairing a flat tire, adjusting brakes and shifting systems, truing wheels, or maintaining hub, headset and bottom bracket bearing systems, the BBB-4 has you covered. Thoroughly researched and revised, the 4th edition of the Big Blue Book contains updated photos, torque specifications and troubleshooting tables, along with new content on wheel building, electronic shifting, 12-speed and 1X drivetrains, tubeless tires, disc brakes, headset and bottom bracket standards, and more. Truly an indispensable tool and reference source for both the novice and advanced bicycle mechanic.

CC-2 FEATURES:

Park Tool CC-2 Chain Checker. Simply insert the Chain Checker’s pins into two links, lightly press the swing arm gauge, and then check the gauge window for an accurate reading. The CC-2 is compatible with most single-speed and derailleur chains*, including Shimano XTR 12-speed chains.

UP-Set FEATURES:

Set of 3 (Tip Shape: Straight, 90° Bend, Hook)

Total Length: 6.5 inches (165 mm)

With magnet

VC-1 FEATURES
The Park Tool VC-1 is a small, handy tool designed to remove and install Schrader and Presta valve cores from bicycle tires, as well as Presta valve extenders with 5mm wrench flats. Helpful for setting up tubeless tires, replacing damaged or leaking valve cores, and rapidly letting air out of large-volume tires.

Commonly referred to as a “fourth hand," the Park Tool BT-2 Cable Stretcher is a great help when installing and adjusting bicycle derailleur and brake cables. With one hand, the BT-2 grabs and holds the cable in place and pulls the cable taut, allowing you to set the perfect amount of tension and secure the pinch bolt. The convenient ratcheting thumb lock holds the cable tension in place. Made from chrome plated heat treated steel, the BT-2 is built for a lifetime of use, with cushion grips for

CCP-22 FEATURES
Compatible with systems that use an M8 or M10 threaded crank bolt, including:
Square taper
BNI cranks for e-bike systems
NOTE: For crank systems that use an M12 or M14 crank bolt, such as ISIS Drive or , use the Park Tool CCP-44 or CWP-7.

CCP-44 FEATURES
Compatible with systems that use an M12 or M15 threaded crank bolt, including:
ISIS Drive
ISIS Overdrive systems
NOTE: For crank systems that use an M8 or M10 crank bolt, such as square taper or , use the Park Tool CCP-22 or CWP-7.

CWP-7 FEATURES
SMALL SWIVEL FOOT
Fits crank arms with M22 x 1.0 threads
Compatible with systems that use an M8 x 1.0 threaded crank bolt, including:
Square taper
BNI cranks for e-bike systems
LARGE SWIVEL FOOT
Fits crank arms with M22 x 1.0 threads
Compatible with systems that use an M12 x 1.0 or M15 x 1.0 threaded crank bolt, including:
ISIS Drive
ISIS Overdrive systems

CC-3.2 FEATURES
5-to-10-speed chains: replace chain at or just before 0.75%
11-to-12-speed chains*: replace at or just before 0.5%
Check with manufacturer for specific replacement instructions
*Use the CC-4 for Flattop™ and T-Type 12-speed chains.

BBT-9 FEATURES
Fits 16-notch tool fittings with a major diameter (outside of notches) of 44–45 mm and a minor diameter (inside of notches) of 42.7 mm, including:
BB80, BB5700, BB70, BB51, and previous external bearing threaded cups
Threaded bottom bracket cups from/
16-notch disc brake rotor lockrings
16-notch BBSH, BBS02 mid-drive motor lockrings
Fits 8-point tool fittings on